Yamaha FS1-E (Fizzy)

download (2)

Design

Originally the FS1-E was built as a five-speed transmission light motorcycle. It was originally called the FS1. Due to the regulations in Europe, the FS1-E was downtuned with a four-speed transmission.

The Yamaha FS1-E has a 49 cc single cylinder two-stroke air-cooled rotary disc-valved engine with a four-speed gearbox. The FS1-E was the FS1 with the suffix E, which stood for England (differing from the models sold in other countries as the FS1-E had more cycle parts in common with other UK-imported Yamaha models). Yamaha introduced various improvements such as a front disc brake (FS1-E DX model) over the years, and later an autolube model with a two stroke oil tank and oil pump, with no need to manually mix two-stroke oil into the fuel tank.

About 200,000 were produced for the UK market. An award winning short film was produced in 2006 and is available entitled ‘Fizzy Days’ encompassing the bikes and the era.

Pedals

The FS1-E had the ability to be powered by push type pedals since this was a legal requirement for registration as a moped in the United Kingdom and some other European countries at the time.

The special pedal cranks allowed both pedals to be rotated forward so that the pedals would form -style footrests in normal operation. To engage the pedals, the left-hand pedal crank could be rotated forward and locked and a drive gear engaged allowing the user to pedal. A short chain connected the pedal drive to the main engine-chain drive system. Pedalling was hard work for the rider: there was no freewheel and the pedal gearing was very low. The engine could be started with pedal drive engaged, causing the pedals to rotate under engine power when the bike was in gear. In practice, the cam and shaft arrangement to engage the pedals frequently seized (in normal operation, a rider would very rarely engage pedal-drive as it was less tiring to push than to pedal).

The pedals were designed by Henk Dullens, a former employee of “Het Motorpaleis” in The Netherlands. The system was designed for a Yamaha F5, which was basically the ancestor for the FS1-E.

download (1)

Yamaha FS1E Specifications

Engine – Air-Cooled 2-Stroke Single disc valve induction
Capacity – 49cc
Bore/stroke – 40mm X 39.7mm
Power – 4.8 bhp @ 7000rpm
Torque – 3.6ft-lb @ 6500rpm
Carburation – 16mm Mikuni VM16SC
Transmission – 4-speed, wet clutch, chain final drive
Frame – Pressed steel back bone
Suspension – 26mm telescopic forks, Twin shock rear
Brakes – 110mm single leading shoe, 110mm single leading shoe
Wheels – 2.25 x 17 2.50 x 17
Weight – 70kgs
Top speed – 45mph
Wheelbase – 1160mm
Fuel capacity – 6ltrs

Engine: Two-stroke single cylinder rotary disc valve induction, four gears, running on a 20:1 mix of petrol and two-stroke oil.

Frame: pressed steel tubular backbone type.

Electrics : Magneto ignition with integral 6V AC for the main running lights (including high and low beam on a switch). The indicators, brake lights, neutral light and horn ran separately on 6 v DC from a three-cell lead acid battery that received a trickle charge from the magneto. On most models the three position ignition switch (on a key providing off, run and lights) was mounted on the L/H side panel, however the switch was moved to the conventional position between the handlebars on the FS1-E DX (front disc brake equipped model) and later FS1-E models.

The right hand side panel contains a basic toolkit in a plastic case, pliers, 3 spanners, double ended screwdriver, plug spanner.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s